Two-color mold frame

categories of news

Product Categories

contact us

Suzhou Guoyang Mold Co., Ltd.

Contact: Zhou Hongyang

Mob:18112666296

Tel:0512-57456608 / 57456288

Fax: 0512-57456208

Web:www.szguoyang.com

Add: Kunshan City Zhangpu Zhenjiang Feng Road 288, Room 3


The difference between standard mold and non-standard mold

Your current location: Home >> News >> Industry news

The difference between standard mold and non-standard mold

Standard mold processing equipment is mainly milling machine, grinder, drilling. Milling machine, grinder 6 bright surface processing to the required size. Drilling machine will die on the frame of the less demanding precision of the hole: such as screw holes, hole drilling holes, Tapping. The most basic requirement of a standard mold frame is that it needs smooth mold opening. Open the mold smoothly or not, and the precision of the four guide post hole is directly related. So generally need to use CNC vertical machining center for rapid drilling and then boring in order to achieve precision.

Non-standard formwork is based on the above-mentioned standardized formwork, and then finishing. Finishing here refers to the mold cavity (mold frame), fine positioning, lock module, waterway (heating / cooling fluid passage), thimble hole . This enables moldmakers to load test molds and plastic products directly into their machined mold cores.


This article URL:http://www.szguoyang.com/en/news/382.html

Key words:non-standardmouldframe,twocolormouldframe,precisionplasticmouldframe

Copyright © http://www.szguoyang.com/en/ Su ICP, No. 18005569 All Rights Reserved.